Can be supplied and directly mounted to nano filtration to ensure process air is clean
27 scfm
⅜” to ½” NPT
0.01 micron
Compact solid-state temperature controller is mounted on top of the unit and the exact temperature output is indicated by a bi-metallic thermometer
Uses an open wound heating coil and high accuracy output temperature sensing device
Filter Model |
Replacement Part No. |
Inlet & Outlet |
Rated Flow (1) |
Supply Voltage |
|
NPT |
scfm |
Nm3/h |
1ph / 50-60 Hz |
||
Heater |
|||||
NH 27 A1 |
- |
3/8” |
27 |
46 |
115 VAC |
NH 27 A2 |
- |
3/8” |
27 |
46 |
230 VAC |
NH 27 B1 |
- |
1/2” |
27 |
46 |
115 VAC |
NH 27 B2 |
- |
1/2” |
27 |
46 |
230 VAC |
Heater + Temperature Gauge |
|||||
NTH 27 A1 |
- |
3/8” |
27 |
46 |
115 VAC |
NTH 27 A2 |
- |
3/8” |
27 |
46 |
230 VAC |
NTH 27 B1 |
- |
1/2” |
27 |
46 |
115 VAC |
NTH 27 B2 |
- |
1/2” |
27 |
46 |
230 VAC |
Filter + Heater |
|||||
NFH 27 A1 |
E 27 M01 |
3/8” |
27 |
46 |
115 VAC |
NFH 27 A2 |
E 27 M01 |
3/8” |
27 |
46 |
230 VAC |
NFH 27 B1 |
E 27 M01 |
1/2” |
27 |
46 |
115 VAC |
NFH 27 B2 |
E 27 M01 |
1/2” |
27 |
46 |
230 VAC |
Filter + Heater + Temperature Gauge |
|||||
NFTH 27 A1 |
E 27 M01 |
⅜” |
27 |
46 |
115 VAC |
NFTH 27 A2 |
E 27 M01 |
⅜” |
27 |
46 |
230 VAC |
NFTH 27 B1 |
E 27 M01 |
½” |
27 |
46 |
115 VAC |
NFTH 27 B2 |
E 27 M01 |
½” |
27 |
46 |
230 VAC |
Specifications |
|
Minimum Operating Flow |
1.7 scfm |
Design Operating Pressure |
22 to 232 psig / 1.5 to 16 bar |
Automatic Float Drain (filter) |
NDK 0050 |
Semi-Automatic Drain (heater) |
NSDK 175 |
Power Rating |
1.5 kW |
Input Temperature Range |
-4 to 248°F / -20 to 120°C |
Controlled Output Temperature Range |
60 to 248°F / 16 to 120°C |
Electrical Connection |
DIN |
Element Performance (2) |
M01 |
Maximum Particle Size (ISO class) (3) |
1 |
Maximum Oil Content (ISO class) (3) |
2 |
Particle Removal |
0.01 micron |
Max Oil Carry Over at 68°F/ 20°C |
0.01 ppm or mg/m3 |
Recommended Operating Temperature Range |
35 to 212°F / 2 to 100°C |
Design Operating Temperature Range |
35 to 248°F / 2 to 120°C |
Maximum Element Life |
12 months or 8000 hours |
(1) at 100 psig/7 barg. For all other pressures, refer to the pressure correction factors above
(2) applies to filter & heater packages (NFH & NFTH) only. Filters are required for all applications containing liquids or aerosols
(3) per ISO 8573.1:2001 (E)
(4) when used in breathing air application, product is to be installed downstream of a suitable breathing air purifier (consult nano). Product does not remove gases such as CO or CO2
(5) technical specifications subject to change without notice.
