Blog 

PDM Dew Point Monitor for compressed air dryers

Compressed Air Dryer Add-Ons

Dew Point Monitor

The nano PDM portable dew point monitor is a reliable and cost effective self contained system for measuring dew point or moisture content in compressed air and gas. Compact, lightweight and easy to use, this system provides accurate, stable dew point or moisture measurements where and when you need it.

Key Specs:

Operating Temperature

-148°F to 68°F/-100 to 20°C

 

Quality Materials

NEMA 4X (IP65) enclosure

Add-Ons

2-volt free contacts

Product Documentation

nano-purification solutions product brochure with equipment details

PDM Brochure - Dew Point Monitor

Filename
EN-PDM-brochure-portable-dew-point-monitor.pdf
Size
388 KB
Format
application/pdf
View
ISO compressed air quality standards brochure

ISO Compressed Air Quality Standards

Filename
EN-ISO-brochure-compressed-air-quality-standards.pdf
Size
7 MB
Format
application/pdf
View

Features

Responds to the slightest changes in moisture content

Compact NEMA4X enclosure includes includes quick connect inlet and outlet connections for ease of installation, integral 0.3 micron filter, flow meter and two programmable alarm relays

Applications include troubleshooting, air audits, performance validation and system calibration

Specifications of our models

 

Standard measurement range

-148°F to 68°F (-100°C to 20°C) or 3000 ppmv (1)

Accuracy

± 3.6°F (± 2°C) of dew point

Operating temperature range

23°F to 122°F (-5°C to 50°C)

Storage temperature

-40°F to 167°F (-40°C to 75°C)

Output

4-20 mA (maximum load resistance 500 Ω)

Alarm

2 volt free contacts (3 A @ 240V)

User interface

front panel configuration of alarm points

Display

4 digit ¾” (20 mm) red LED

Power supply

85 to 265 VAC, 50 or 60 Hz

Ingress protection

NEMA 4X (IP65)

Power cord

6.5 ft (2 m) power cord provided

Maximum pressure

145 psig (1 MPa/10 barg) (2)

Sample flow rate

2.1 to 10.5 scfh (1 to 5 L/min)

Filtration

99.5% removal efficiency at 0.3 micron

Connections

6 mm OD quick connect tube fittings

Sensor guard

sintered HDPE

Protective case

polycarbonate

Internal tubing

PTFE

Warranty

1 year

(1) choice of dew point or ppmv must be specified at time of order. Non standard dew point ranges available on request

(2) higher pressure options available on request

(3) technical specifications subject to change without notice. Direct inquiries to [email protected] or contact 704.897.2182

Related Products

Let's Connect

Get world-class experience with nano today.

Worker