Dryer Model |
Recommended Pre & After Filtration |
Inlet & Outlet |
Rated Flow (1) |
Absorbed Power (2) |
Power Supply (V/Ph/60Hz) |
|||
Pre Filter |
After Filter |
NPT |
scfm |
Nm3/h |
kW |
115/1 |
208/230/1 |
|
NF 0030 M1 |
NF 0030 M01 |
½” |
30 |
51 |
0.15 |
• |
||
NF 0050 M1 |
NF 0050 M01 |
½” |
40 |
68 |
0.19 |
• |
||
NF 0070 M1 |
NF 0070 M01 |
½” |
60 |
102 |
0.25 |
• |
||
NF 0085 M1 |
NF 0085 M01 |
½” |
80 |
136 |
0.25 |
• |
||
NF 0280 M1 |
NF 0280 M01 |
1 ¼” |
100 |
170 |
0.37 |
• |
||
NF 0280 M1 |
NF 0280 M01 |
1 ¼” |
125 |
212 |
0.56 |
• |
||
NF 0280 M1 |
NF 0280 M01 |
1 ¼” |
150 |
255 |
0.56 |
• |
||
NF 0290 M1 |
NF 0290 M01 |
1 ½” |
200 |
340 |
0.75 |
• |
||
Specifications |
ND4X 30 to ND4X 125 |
ND4X 150 to ND4X 200 |
Design operating pressure range |
0 to 250 psig / 0 to 17.2 bar |
0 to 250 psig / 0 to 17.2 bar |
Maximum inlet temperature |
180°F / 82°C |
120°F / 49°C |
Maximum ambient temperature |
110°F / 43°C |
110°F / 43°C |
(1) in compliance with ADF 100 specifications for compressed air dryers: inlet temperature: 100°F, ambient temperature: 100°F, inlet pressure: 100 psig, pressure dew point: 33°F to 39°F. For all other conditions refer to the correction factors above or
contact [email protected]
(2) nominal absorbed power at rated operating conditions using 115/1/60 and 230/1/60 power supply (as applicable). For absorbed power at other voltages or conditions, contact [email protected]
(3) to be used as a rough guide only. All applications should be confirmed by nano sizing software. Contact [email protected] for sizing assistance
(4) technical specifications subject to change without notice. Direct inquiries to [email protected] or contact 704.897.2182
