Our models are operated by a robust and reliable PLC system housed in a NEMA4X control panel
Key Specs:
Flow Rate
100 to 5000 scfm
Connection
1” NPT(F) to 6” Flg
Air Quality
ISO 8573.1:2010 Class 1.2.2 or 1.1.2
Product Documentation
- Brochures
- User Guides
- Worksheets
- Technical Papers
- GA Drawings
- Electrical Diagram
D5 EHA - User Guide
- Filename
- D5-EHA-user-guide-manual-externally-heated-desiccant-dryer.pdf
- Size
- 2 MB
- Format
D-Series Application Worksheet
- Filename
- EN-D-series-worksheet-desiccant-dryers.pdf
- Size
- 212 KB
- Format
D-Series Technical Paper
- Filename
- EN-D-Series-technical-paper-desiccant-dryers.pdf
- Size
- 450 KB
- Format
D5 EHA - General Arrangement (GA) Drawing
- Filename
- D5-EHA-ga-drawing-general-arrangement-externally-heated-twin-tower-desiccant--Airtak-dryer.pdf
- Size
- 620 KB
- Format
D5 EHA 100-700 - Electrical Diagram
- Filename
- D5-EHA-100-700-electrical-wiring-schematics-externally-heated-twin-tower-desiccant-dryer.pdf
- Size
- 1 MB
- Format
D5 EHA 0850-5000 - Electrical Diagram
- Filename
- D5-EHA-0850-5000-electrical-wiring-schematics-externally-heated-twin-tower-desiccant-dryer..pdf
- Size
- 1 MB
- Format
Features
Our energy saving dew point control option provides the ultimate in energy and power savings and reduces dryer wear and tear
ASME code pressure vessels, UL/cUL compliant, made in the USA activated alumina, lifting lugs and/or fork lift pockets
Specifications of our models
Dryer Models |
Recommended Pre & After Filtration (1) |
Inlet & Outlet (2) |
Rated Flow (3) |
Heater |
||
Pre-Filter |
After-Filter |
NPT (F) / FLG |
scfm |
Nm3/h |
kW |
|
GF 0105 M01 |
NHT 0150 M1 |
1" |
100 |
161 |
1.5 |
|
GF 0325 M01 |
NHT 0300 M1 |
1 ½" |
175 |
282 |
3 |
|
GF 0325 M01 |
NHT 0300 M1 |
1 ½" |
250 |
403 |
3 |
|
GF 0450 M01 |
NHT 0450 M1 |
2" |
350 |
564 |
6 |
|
GF 0700 M01 |
NHT 0650 M1 |
2" |
500 |
805 |
6 |
|
GF 0700 M01 |
NHT 1000 M1 |
2" |
700 |
1127 |
9 |
|
GF 0850 M01 |
NHT 1000 M1 |
2" |
850 |
1369 |
9 |
|
GF 1250 M01 |
NHT 1000 M1 |
3" |
1000 |
1610 |
12.5 |
|
GF 1500 M01 |
NHT 1600 M1 |
3" |
1350 |
2174 |
12.5 |
|
NFZ 2500 M01 |
NFZ 2500 M1HT |
3" |
1700 |
2737 |
18 |
|
NFZ 2500 M01 |
NFZ 2500 M1HT |
4" |
2100 |
3381 |
25 |
|
NFZ 2500 M01 |
NFZ 2500 M1HT |
4" |
2400 |
3864 |
25 |
|
NFZ 3500 M01 |
NFZ 3500 M1HT |
4" |
3100 |
4991 |
30 |
|
NFZ 4000 M01 |
NFZ 4000 M1HT |
6" |
3800 |
6118 |
40 |
|
NFZ 5000 M01 |
NHT 5000 M1HT |
6" |
4300 |
6923 |
50 |
|
NFZ 5000 M01 |
NHT 5000 M1HT |
6" |
5000 |
8050 |
50 |
|
Specifications |
Standard |
Optional |
maximum water content (ISO class) (5) |
class 2 (1 micron) |
class 1 (0.01 micron) |
maximum water content (ISO class) (5) |
class 2 (-40°F/-40°C pdp) |
- |
minimum/ design /maximum operating pressure range (6) |
80 psig / 100 psig / 150 psig 5.5 bar / 6.9 bar / 10.3 bar |
58 to 250 psig / 4 to 17.2 bar |
minimum / design/ maximum ambient temperature |
38°F / 100°F / 120°F 3°C / 38°C / 49°C |
- |
minimum / design / maximum inlet temperature |
38°F / 100°F/ 120°F 3°C / 38°C / 49°C |
- |
power supply requirements |
460VAC/60Hz |
575V/60Hz or 380 VAC/50Hz |
(1) 3" and below are NPT(F) threaded. 4" and above are flanged. All units with 3" piping and above will be ANSI welded pipe
(2) in compliance with ADF 100 specifications for compressed air dryers: Inlet temperature: 100°F/38°C, ambient temperature: 100°F/38°C, inlet pressure dew point: -40°F/-40°C. For all other conditions refer to the correction factors or contact support
(3) approx. weight for all models does not include desiccant installed
(4) recommended for all applications and includes NPT pre and after filters mounted on the dryers. For flanged, consult factory (add -F2 suffix)
(5) per ISO 8573.1:2010
(6) maximum working pressure for all models is 150 psig/10.3 barg. For higher pressures, contact support
(7) be used as a rough guide only. All applications should be confirmed by nano. Contact nano for sizing assistance
(8) all models are UL/cUL compliant
(9) all models have ASME coded pressure vessels. For other approvals, consult support
(10) for sizes above 5000 scfm and pressure below 60 psig/4.1 barg, please contact support
(11) technical specifications subject to change without notice. Direct inquiries to support or contact 704.897.2182
