Regeneration circuit is fully insulated for maximum efficiency, and specifically designed for a long and dependable operating life in harsh industrial environments
800 to 6000 scfm
3” NPT(F) to 8” Flg
ISO 8573.1:2010
Utilizes atmospheric air for regeneration, making for easy maintenance. Also includes a rugged construction with TEFC premium motor that includes filtered air intake
ASME code pressure vessels, UL/cUL compliant, made in the USA activated alumina, lifting lugs and/or fork lift pockets
Dryer Models |
Recommended Pre & After Filtration (1) |
Inlet & Outlet (2) |
Rated Flow (3) |
Heater |
||
Pre-Filter |
After-Filter |
NPT (F)/FLG |
scfm |
Nm3/h |
kW |
|
GF 0850 M01 |
NHT 1000 M1 |
3" |
800 |
1352 |
18 |
|
GF 1250 M01 |
NHT 1000 M1 |
3" |
1000 |
1690 |
22 |
|
GF 1250 M01 |
NHT 1250 M1 |
3" |
1200 |
2028 |
27 |
|
GF 1500 M01 |
NHT 1600 M1 |
3" |
1400 |
2366 |
32.5 |
|
NFZ 2500 M01 |
NHT 1600 M1 |
4" |
1600 |
2704 |
37 |
|
NFZ 2500 M01 |
NFZ 2500 M1HT |
4" |
2000 |
3380 |
45 |
|
NFZ 2500 M01 |
NFZ 2500 M1HT |
4" |
2500 |
4225 |
52 |
|
NFZ 3500 M01 |
NFZ 3500 M1HT |
6" |
3000 |
5070 |
64 |
|
NFZ 3500 M01 |
NFZ 3500 M1HT |
6" |
3500 |
5915 |
78 |
|
NFZ 4000 M01 |
NFZ 4000 M1HT |
6" |
4000 |
6760 |
90 |
|
NFZ 5000 M01 |
NFZ 5000 M1HT |
6" |
5000 |
8450 |
110 |
|
NFZ 5000 M01 |
NFZ 7500 M1HT |
6" |
6000 |
10140 |
120 |
Specifications |
Standard |
Optional |
Maximum particle size (ISO class) (5) |
class 2 (1 micron) |
class 1 (0.01 micron) |
Maximum water content (ISO class) (5) |
class 2 (-40°F/-40°C pdp) |
- |
Minimum / design / maximum operating pressure range (6) |
60 psig / 100 psig / 150 psig 4.1 bar / 6.9 bar / 10.3 bar |
58 to 250 psig 4 to 17.2 bar |
Minimum / design / maximum ambient temperature (6) |
38°F / 100°F/ 120°F 3°C / 38°C / 49°C |
- |
Minimum / design / maximum inlet temperature (6) |
38°F / 100°F/ 120°F 3°C / 38°C / 49°C |
- |
Power supply requirements |
460 VAC / 60 Hz |
- |
(1) all units are flanged, ANSI welded pipe
(2) in compliance with ADF 100 specifications for compressed air dryers: Inlet temperature: 100°F, ambient temperature: 100°F, inlet pressure
dew point: -40°F. For all other conditions refer to the correction factors or contact [email protected]
(3) approx. weight for all models includes desiccant; units 2500 scfm and above desiccant is shipped loose
(4) pre and after filters mounted on dryer as standard
(5) per ISO 8573.1:2010
(6) maximum working pressure for all models is 150 psig. For higher pressures, contact [email protected]
(7) be used as a rough guide only. All applications should be confirmed by nano. Contact nano for sizing assistance
(8) all models are UL/cUL compliant
(9) all models have ASME coded pressure vessels. For other approvals, consult [email protected]
(10) technical specifications subject to change without notice. Direct inquiries to [email protected] or contact 704.897.2182