Operated by a robust and reliable PLC system housed in a NEMA4X control panel
Flow Rate
250 to 7750 scfm
Connection
1 ½” NPT(F) to 8” Flg
Air Quality
ISO 8573.1:2010 Class 1.2.2
Product Documentation
- Brochures
- User Guides
- Worksheet
- Technical Paper
- GA Drawing
- Electrical Diagram
ISO Compressed Air Quality Standards
- Filename
- EN-ISO-brochure-compressed-air-quality-standards.pdf
- Size
- 7 MB
- Format
- application/pdf
D5 BPA - User Guide
- Filename
- D5-BPA-user-guide-manual-blower-purge-desiccant-dryer.pdf
- Size
- 2 MB
- Format
- application/pdf
BPA Controller - User Guide
- Filename
- D5-BPA-user-guide-controller-blower-purge-desiccant-dryer.pdf
- Size
- 1 MB
- Format
- application/pdf
D-Series Application Worksheet
- Filename
- EN-D-series-worksheet-desiccant-dryers.pdf
- Size
- 212 KB
- Format
- application/pdf
D-Series Technical Paper
- Filename
- EN-D-Series-technical-paper-desiccant-dryers.pdf
- Size
- 450 KB
- Format
- application/pdf
D5 BPA - General Arrangement (GA) Drawing
- Filename
- D5-BPA-ga-drawing-general-arrangement-blower-purge-twin-tower-dessicant-dryer.pdf
- Size
- 675 KB
- Format
- application/pdf
D5 BPA 250-7750 - Electrical Diagram
- Filename
- D5-BPA-250-7750-electrical-wiring-schematics-blower-purge-desiccant-dryer.pdf
- Size
- 1 MB
- Format
- application/pdf
Features
Our energy saving dew point control option provides the ultimate in energy and power savings and reduces dryer wear and tear
ASME code pressure vessels, UL/cUL compliant, made in the USA activated alumina, lifting lugs and/or fork lift pockets
Specifications of our models
Dryer Models |
Recommended Pre & After Filtration (1) |
Inlet & Outlet (2) |
Rated Flow (3) |
Heater |
||
Pre-Filter |
After-Filter |
NPT (F)/FLG |
scfm |
Nm3/h |
kW |
|
GF 0325 M01 |
NHT 0300 M1 |
1 ½" |
200 |
322 |
6 |
|
GF 0450 M01 |
NHT 0450 M1 |
2" |
250 |
403 |
6 |
|
GF 0700 M01 |
NHT 0650 M1 |
2" |
350 |
564 |
9 |
|
GF 0700 M01 |
NHT 1000 M1 |
2" |
500 |
805 |
12.5 |
|
GF 0850 M01 |
NHT 1000 M1 |
2" |
700 |
1127 |
12.5 |
|
GF 1250 M01 |
NHT 1000 M1 |
3" |
850 |
1369 |
15 |
|
GF 1500 M01 |
NHT 1600 M1 |
3" |
1000 |
1610 |
18 |
|
NFZ 2500 M01 |
NFZ 2500 M1HT |
4" |
1350 |
2174 |
25 |
|
NFZ 2500 M01 |
NFZ 2500 M1HT |
4" |
1700 |
2737 |
30 |
|
NFZ 2500 M01 |
NFZ 2500 M1HT |
4" |
2100 |
3381 |
38 |
|
NFZ 3500 M01 |
NFZ 3500 M1HT |
6" |
2400 |
3864 |
50 |
|
NFZ 4000 M01 |
NFZ 4000 M1HT |
6" |
3100 |
4991 |
60 |
|
NFZ 5000 M01 |
NFZ 5000 M1HT |
6" |
3800 |
6118 |
85 |
|
NFZ 5000 M01 |
NFZ 5000 M1HT |
6" |
4300 |
6923 |
85 |
|
NFZ 7500 M01 |
NFZ 7500 M1HT |
8" |
5000 |
8050 |
100 |
|
BPA 7750 |
NFZ 8500 M01 |
NFZ 8500 M1HT |
8" |
6250 |
10063 |
120 |
Specifications |
Standard |
Optional |
Maximum particle size (ISO class) (5) |
class 2 (1 micron) |
class 1 (0.01 micron) |
Maximum water content (ISO class) (5) |
class 2 (-40°F/-40°C pdp) |
- |
Minimum / design / maximum operating pressure range (6) |
80 psig / 100 psig / 150 psig 5.5 bar / 6.9 bar / 10.3 bar |
58 to 250 psig / 4 to 17.2 bar |
Minimum / design / maximum ambient temperature (6) |
38°F / 100°F/ 120°F 3°C / 38°C / 49°C |
- |
Minimum / design / maximum inlet temperature (6) |
38°F / 100°F/ 120°F 3°C / 38°C / 49°C |
- |
Power supply requirements |
460 VAC / 60 Hz |
575V / 60 Hz or 380 VAC / 50 Hz |
(1) recommended for all applications and includes NPT pre and after filters mounted on the dryers. For flanged, consult factory. (add -F2 suffix)
(2) 3” and below are NPT(F) threaded. 4” and above are flanged. All units with 3” piping and above will be ANSI welded pipe
(3) in compliance with ADF 100 specifications for compressed air dryers: Inlet temperature: 100°F/38°C, ambient temperature: 100°F/38°C, inlet pressure: 100 psig/7 barg, pressure dew point: -40°F/-40°C. For all other conditions refer to the correction factors above or contact support
(4) approx. weight for all models does not include desiccant installed
(5) per ISO 8573.1:2010
(6) to be used as a rough guide only. All applications should be confirmed by nano. Contact support
(7) maximum working pressure for all models is 150 psig/10.3 barg. For higher pressures, contact support
(8) all models are UL/cUL compliant
(9) all models have ASME coded pressure vessels. For other approvals, consult support
(10) specifications subject to change without notice
(11) for sizes above 7750 scfm and pressure below 60 psig/4.1 barg, please contact support
