Includes air-cooled air driven aftercooler, high efficiency water separator, pre-filtration with automatic drains, high performance twin tower heatless desiccant dryer and high efficiency after filters
1300 to 3800 scfm
3” NPT(F) to 6” Flg
ISO 8573.1:2010 Class 1.2.1 or 1.1.2
Operated by a robust and reliable PLC system housed in a NEMA4X control panel
Pneumatically actuated high-performance butterfly valves for the highest reliability
Dryer Model |
Filtration (4) |
Inlet & Outlet (1) |
Rated Flow (2) |
|||
Water Separator |
Pre Filter |
After Filter |
NPT (F) / Flg |
|||
scfm |
Nm3/h |
|||||
HLA 1300-F2-RENTAL |
NF 1500 WS |
NF 1500 M01 |
NF 1500 M1 |
3” |
1300 |
2208 |
HLA 1500-F2-RENTAL |
NF 1500 WS |
NF 1500 M01 |
NF 1500 M1 |
3” |
1500 |
2548 |
HLA 3800-F2-RENTAL |
AFE4000WS |
NFZ 3000 M01 |
NFZ 3000 M1 |
6” |
3800 |
6456 |
Specifications |
Standard |
Optional |
maximum particle size (ISO class) (5) |
class 2 (1 micron) |
class 1 (0.01 micron) |
maximum water content (ISO class) (5) |
class 2 (-40°F/-40°C pdp) |
class 1 (-94°F/-70°C pdp) |
minimum/ design /maximum operating pressure range (6) |
70 psig / 100 psig / 150 psig 4.8 bar / 6.9 bar / 10.3 bar |
- |
minimum / design/ maximum ambient temperature |
38°F / 100°F / 120°F 3°C / 38°C / 49°C |
- |
minimum / design / maximum inlet temperature |
38°F / 100°F/ 120°F 3°C / 38°C / 49°C |
- |
power supply requirements |
115V/1Ph/60Hz |
230V/1Ph/60Hz & 12 VDC |
(1) 3" are NPT(F) threaded. 6" are flanged. All units with 3" piping and above will be ANSI welded pipe
(2) in compliance with ADF 100 specifications for compressed air dryers: Inlet temperature: 100°F, ambient temperature: 100°F, inlet pressure
dew point: -40°F. For all other conditions refer to the correction factors or contact [email protected]
(3) approx. weight for all models does not include desiccant installed
(4) includes water separator, pre and after filters mounted on the dryers
(5) per ISO 8573.1:2010
(6) maximum working pressure for all models is 150 psig. For higher pressures, contact [email protected]
(7) be used as a rough guide only. All applications should be confirmed by nano. Contact nano for sizing assistance
(8) all models are UL/cUL compliant
(9) all models have ASME coded pressure vessels. For other approvals, consult [email protected]
(10) for other flow rates and pressure please contact [email protected]
(11) technical specifications subject to change without notice. Direct inquiries to [email protected] or contact 704.897.2182
