Pleated stainless steel elements incorporate a positive double o-ring click-lock seal
125 to 4250 lbs/hr
½” to 3” NPT(F)
1 micron
Fabricated from polished 304 or 316 stainless steel for critical air and gas applications
Optimally suited for applications such as food processing, beverage, dairy, biotechnology, and aseptic processing
Filter Model |
Replacement Element |
Inlet & Outlet |
Rated Flow (1) |
Part No. |
NPT(F) |
lbs/hr |
|
PF 0085 SP-N |
E 102 SP |
½” |
125 |
PF 0120 SP-N |
E 102 SP |
¾” |
300 |
PF 0170 SP-N |
E 105 SP |
1” |
500 |
PF 0460 SP-N |
E 110 SP |
2” |
1500 |
PF 0850 SP-N |
E 120 SP |
2 ½” |
2600 |
PF 1150 SP-N |
E 130 SP |
3” |
4250 |
Specifications |
Standard |
Optional |
Design Operating Pressure Range |
0 to 232 psig |
- |
Inlet & Outlet Connections |
NPT(F) |
tri-clamp sanitary |
Drain & Vent connections |
1/4” BSPP |
- |
Filter Housing Material |
1.4301 Quality 304 Stainless Steel |
1.4404 Quality 316L Stainless Steel |
Filter Housing Polishing |
Passivated & Polished to Grade Ra <1.6um |
- |
Filter Housing Seals |
Aseptic EPDM |
Consult Factory |
Element Performance |
SP |
Particle Removal |
0.01 Micron |
Continuous Operating Temperature Range |
35 to 120°F / 2 to 49°C |
Maximum Sterilizing Temperature (3) |
257°F / 125°C |
Media Material |
Hydrophobic PTFE Membrane |
Media Support & Endcap Material |
Polypropylene |
Element to Housing Connection |
Positive Click Lock with Dual Silicone O-Rings |
(1) at 100 psig. For all other pressures, refer to the pressure correction factors above
(3) at 30 psia for 20 minutes. Apples to element only
(4) validation documents available upon request
(5) not for use in air or gas streams containing water or oil
(6) all materials conform to 21CFR Part 177 of the US code of Federal Regulations and USP Class VI Biological test for plastics
(7) air flow from outside to inside
(8) technical specifications subject to change without notice. Direct inquiries to [email protected] or contact 704.897.2182
